NGN - Lijst met Newton Errors

Verversingsdatum: 14 mei 1997.

Newton Errors


Uit: Appendix A van de Newton Programmer's Reference for Newton 2.0
Versie: Pre-final Reference (subject to change)

This appendix lists the exceptions and error codes that the Newton system software generates. These are grouped into the following categories:
1. System exceptions
2. System errors vanaf 0
3. Hardware errors vanaf -10500
4. Communications errors vanaf -12000
5. System services errors vanaf -30000
6. NewtonScript environment errors vanaf -48000
7. Device driver errors vanaf -56000
8. Other errors vanaf -58000

Each of the categories is subdivided into several tables of related error codes to make it easier to find an error. All errors in this appendix are listed in ascending numeric order.

1. System Exceptions

These are the two main types of exceptions that can be raised by the Newton system software.

|evt.ex.fr| NewtonScript environment exception
|evt.ex.comm| Communications toolbox exception

2. System Errors

This section lists the different kinds of Newton system software errors.

Common Errors

0 No error
-7000 Not enough memory available

Application Errors

-8001 PCMCIA card battery must be replaced
-8002 PCMCIA card battery is running low
-8003 Nothing to undo
-8004 The routing slip is already open
-8005 Close box must be tapped to hang up the modem
-8006 Nothing to print
-8007 Exception not handled
-8008 The length of a styles slot had to be extended
-8009 A length in the read-only styles slot is too short to display the text
-8010 Communications card has been inserted
-8011 Note has too many items
-8012 Note is too large
-8013 Note is too long
-8100 Blank note could not be created
-8101 Item could not be moved
-8102 Changes could not be saved
-8103 A problem has occurred
-8104 Problem with the PCMCIA card
-8105 Note could not be changed

I/O Box Errors

-8301 Missing transport
-8302 Missing slip
-8303 Cannot convert

View System Errors

-8501 Could not create view
-8502 Missing class slot
-8503 Unknown view stationery
-8504 Missing view flags
-8505 Missing view bounds

State Machine Errors

-8601 Invalid state
-8602 No state
-8603 No wait state
-8604 No polling routine
-8605 Polling timed out
-8606 Aborted
-8607 No reentrance
-8608 Invalid mode

Operating System Errors

-10000 Bad domain object ID
-10001 Bad physical page object ID
-10002 Unexpected object type
-10003 No page table
-10004 Allocation on an uninitialized heap
-10005 Call not implemented
-10006 Bad parameters
-10007 Not enough memory
-10008 Item not found
-10009 Could not create object
-10010 Must use a remote procedure call
-10011 Bad object
-10012 Not a user call
-10013 Task does not exist
-10014 Unexpected end of message
-10015 Bad object ID
-10016 Bad message object ID
-10017 Message already posted
-10018 Cannot cash token
-10019 Port no longer exists
-10020 No message waiting
-10021 Communications problem (message timed out)
-10022 Bad semaphore group ID
-10023 Bad semaphore operation list ID
-10024 Semaphore group no longer exists
-10025 Semaphore would cause blocking
-10026 Task no longer exists
-10027 Task aborted
-10028 Cannot suspend blocked task
-10029 Bad register number
-10030 Bad monitor function
-10031 No such monitor
-10032 Not a monitor
-10033 Size too large in shared memory call
-10034 Shared memory mode violation
-10035 Object not owned by task
-10036 Object not assigned to task
-10037 Total confusion
-10038 Another task already blocking
-10039 Cancelled
-10040 Object already initialized
-10041 Nested collection
-10042 Shared memory message no longer exists
-10043 Receiver did not perform remote procedure call
-10044 Copy aborted
-10045 Bad signature
-10046 Call not in progress
-10047 Token expected
-10048 Receiver object no longer exists
-10049 Monitor is not suspended
-10050 Not a fault monitor
-10051 No available page
-10052 Interrupt not enabled
-10053 Interrupt not implemented
-10054 Tric interrupt not enabled
-10055 Tric interrupt not implemented
-10056 Unresolved fault
-10057 Call already in progress
-10058 Offset beyond data
-10059 Bus access
-10060 Access permission
-10061 Permission violation
-10062 Duplicate object
-10063 Ill formed domain
-10064 Out of domains
-10065 Write protected
-10066 Timer expired
-10067 Not registered
-10068 Already registered
-10069 System restarted due to a power fault
-10070 System restarted because the battery was dead
-10072 System restarted because a PCMCIA card was removed while in use.
-10073 RAM table is full
-10074 Unable to satisfy request
-10075 System error
-10076 System failure
-10077 New system software
-10078 Resource is claimed
-10079 Resource is unclaimed

Stack Errors

-10200 Stack too small
-10201 No room for heap
-10202 Stack is corrupted
-10203 Stack overflow
-10204 Stack underflow
-10205 Address out of range
-10206 Bad domain

Package Errors

-10401 Bad package
-10402 Package already exists
-10403 Bad package version
-10404 Unexpected end of package
-10405 Unexpected end of package part
-10406 Part type is already registered
-10407 Part type is not registered
-10408 No such package exists
-10409 Newer package already exists
-10410 Newer version of application already installed

3. Newton Hardware Errors

This section lists the different kinds of Newton hardware errors.

PCMCIA Card Errors

-10501 Unrecognized card
-10502 Card not ready
-10503 Bad power on card
-10504 Unexpected card error
-10505 Card reset
-10506 Card is not initialized
-10507 Card service is not installed
-10508 Card service is not suspended
-10509 Card service has not been resumed
-10510 No usable configurations on card
-10511 Card could not be formatted
-10512 Card could not be formatted because it is write-protected
-10520 Bad CIS parser procedure pointer
-10521 Unknown tuple in CIS
-10522 Unknown subtuple in CIS
-10523 CIS tuple order is bad
-10524 CIS tuple size is bad
-10525 CIS tuple specified as no link has a link
-10526 CIS tuple specified with a link has no link
-10527 CIS tuple link target is bad
-10528 Bad CIS tuple version 1
-10529 Bad CIS tuple version 2
-10530 Bad CIS JEDEC tuple
-10531 Bad CIS checksum
-10532 Missing CIS
-10533 Blank CIS
-10534 Bad CIS
-10535 Bad link target

Flash Card Errors

-10551 Flash card is busy
-10552 Flash card is not erasing
-10553 Flash card erase is not suspended
-10554 Flash card suspend erase error
-10555 Flash card erase failed
-10556 Flash card write failed
-10557 Flash card Vpp is low
-10558 Flash card error in sleep
-10559 Flash card does not have enough power

Card Store Errors

-10600 Attempt to read or write outside of object bounds
-10601 Bad buffer pointer
-10602 Bad card access
-10603 Bad storage type
-10604 Store not found
-10605 The store has been write-protected by the user
-10606 Object not found
-10607 Flash card block is full
-10608 Flash card is not virgin
-10609 Write error (one or more bits failed to assert)
-10610 No more objects
-10611 Flash card erase in progress
-10612 Card is full
-10613 No more blocks left in search on flash card
-10614 Flash card log is full
-10615 Card needs to be formatted
-10616 Bad or unknown PSSID
-10617 Card memory is full
-10618 Missing or low battery on SRAM card
-10619 Attempt to modify store without a transaction in effect
-10620 Transaction aborted
-10621 Card needs recovery, but it is write-protected
-10622 Object too large for store

DMA Errors

-10800 DMA mode
-10801 DMA bus access
-10802 DMA buffer doesn't exist
-10803 DMA address word alignment
-10804 DMA count word alignment
-10805 DMA count size
-10806 DMA offset size
-10820 DMA PCMCIA ready
-10821 DMA PCMCIA input acknowledgment
-10822 DMA PCMCIA write protect
-10823 DMA PCMCIA time out

Heap Errors

-10900 Heap odd block size
-10901 Heap block out of range
-10902 Heap preferred free not found
-10903 Heap free accounting error
-10904 Heap accounting error
-10905 Heap block too big
-10906 Heap bad prior pointer
-10907 Heap bad last pointer in prior
-10908 Heap bad last pointer in last

4. Communications Errors

This section lists the different kinds of Newton communications errors.

Generic AppleTalk Errors

-12001 Buffer too small or corrupted
-12002 Event is pending
-12003 Cancelled
-12004 Attempt to cancel failed
-12005 No handler for cancel
-12006 Unknown message receiver
-12007 Cannot create AppleTalk port
-12008 Cannot create AppleTalk task
-12009 Not implemented
-12010 Data length error
-12011 No such subject available to open
-12012 Not opened
-12014 AppleTalk is already open
-12015 Duration is too small
-12016 Duration is too large

LAP Protocol Errors

-12100 LAP read link failed
-12101 LAP all protocols in use
-12102 No protocol handler
-12103 No such command
-12104 Bad link

DDP Protocol Errors

-12200 No such DDP command
-12201 Invalid socket
-12202 Not in static socket range
-12203 Not in dynamic socket range
-12204 Socket is already open
-12205 Socket not open
-12206 Socket internal socket
-12207 Socket is in use
-12208 Unknown LAP type
-12209 DDP back check sum
-12210 Bad packet size
-12211 No listener for socket
-12212 No such protocol type known
-12213 External client timed out

NBP Protocol Errors

-12300 Bad form
-12301 Name is already registered
-12302 Too many names
-12303 Name is not registered
-12304 Too many names requested
-12305 Too many lookups are pending
-12306 Not a NBP packet DDP type
-12307 Unknown NBP function
-12308 Unknown NBP lookup reply
-12309 Too many tuples in lookup request
-12311 NBP index out of range
-12312 NBP lookup aborted
-12313 No such command
-12314 No names found

AEP Protocol Errors

-12400 No such command
-12401 Not an echo packet DDP type
-12402 AEP packet size is zero
-12403 AEP function not requested

RTMP Protocol Errors

-12500 No such command
-12502 Packet size is zero
-12503 RTMP routed
-12504 RTMP address unresolved
-12505 RTMP no router available

ATP Protocol Errors

-12600 No such command
-12601 No ATP packet DDP type
-12602 Unknown ATP function
-12603 ATP request data length is zero
-12604 Expected responses are out of range
-12605 Response buffer is too small
-12606 ATP retry duration too small
-12607 ATP transaction timed out
-12608 Responding socket already open
-12609 Responding socket not open
-12610 Response packet length bad
-12611 Bad number of response packets
-12612 Socket already has a request on autorequest

PAP Protocol Errors

-12700 No such command
-12701 Unexpected connection ID
-12702 Invalid connection ID
-12703 Invalid responder socket
-12704 Unexpected function
-12705 Printer is busy
-12706 Unexpected connection open result
-12707 Bad flow quantum requested
-12708 Connection timed out
-12709 EOF sent
-12710 PAP flushed
-12711 Printer terminated connection
-12712 Printer not found
-12713 No status available
-12714 No data available
-12715 The buffer that was passed is too small
-12716 Put data operation timed out

ZIP Protocol Errors

-12800 No zones

ADSP Protocol Errors

-12900 Too many ADSP connections
-12901 ADSP mode invalid
-12902 ADSP packet size bad
-12903 ADSP control type bad
-12904 Remote end disconnected

Utility Class Errors

-14001 Not implemented
-14002 Out of memory
-14003 Bad position
-14004 Already initialized
-14005 Invalid size
-14006 Overflow
-14007 Underflow
-14008 Range check failed
-14009 Element sizes do not match
-14010 Not initialized
-14011 Pointer is nil

Communications Tool Errors

-16001 Command in progress
-16002 Bad communication tool command
-16003 Tool already has maximum requests pending
-16004 Buffer overflow
-16005 Request canceled or connection disconnected
-16006 Bad parameter in request
-16007 Connection end has not been created yet
-16008 Invalid call when connected
-16009 Phone connection was cut off, or invalid call when not connected
-16010 Connection negotiation failed because remote end is not compatible with local end configuration
-16011 Connection terminated or failed due to retransmission limit of data or connect packet
-16012 No data available for TCommToolGetRequest when fNonBlocking is true.
-16013 Request canceled or connection disconnected
-16014 Call not supported by tool
-16015 Request not pending
-16016 Event not pending
-16017 Time-out waiting for connection
-16018 Connection end is already bound
-16019 Connection end was not bound before use
-16020 Connection end is being released
-16021 No phone number was provided
-16022 Operation failed because a resource was not available
-16023 Call failed because the option passed is not supported
-16024 The method is not implemented

Serial Tool Errors

-18000 Serial channel is in use
-18001 Memory error
-18002 Not current owner of the serial port
-18003 Framing or parity overrun, or bad connection
-18004 CRC error on input framing
-18005 An internal error has occurred
-18006 Packet size too large or too small in an output request
-18007 Unexpected packet length
-18008 EOF not found
-18009 Overrun bit was set
-18010 Too many collisions when sending packet
-18011 Too many deferrals when sending packet
-18012 Timed out waiting for an event
-18013 Serial tool is not active or ready

MNP Tool Errors

-20001 Connection parameter negotiation failed
-20002 Acceptor of connect request timed out
-20003 Not connected
-20004 Request aborted by disconnect request
-20005 Link attention service is not enabled
-20006 Request retry limit of connect initiator reached
-20007 Command already in progress
-20008 Connection already established
-20009 Connection failed due to incompatible protocol levels
-20010 Connection handshake failed
-20011 Memory for MNP not allocated

FAX Tool Errors

-22001 Lost connection while sending or receiving FAX
-22002 FAX machine is not compatible
-22003 Transmission error
-22005 FAX machine had a problem sending some pages
-22006 Transmission error
-22007 Transmission error

Modem Tool Errors

-24000 No modem is connected
-24001 There is no dial tone
-24002 There is no answer
-24003 The phone number is busy
-24004 There is no answer
-24005 The modem is not responding properly
-24006 FAX carrier error
-24007 The modem is not responding properly
-24008 The modem connected to the serial port does not support cellular connection
-24009 The AT+FRH command timed out when receiving flags

Communications Manager Errors

-26000 Service already initialized
-26001 Unknown command
-26002 Unknown service
-26003 Service already exists
-26004 No service specified in the options array
-26005 There is no registered service matching the type specified in the options array
-26006 No endpoint exists; this is usually because CMStartService has not been called
-26007 No public port exists; this is usually because CMGetEndPoint has not been called
-26008 No known last connected device
-26009 A tuple has been received, but no the device ID tuple
-26010 A service information response tuple was expected
-26011 Unsupported service; can only load packages
-26012 An SCP load is in progress and another cannot be issued
-26013 The SCP load call is not supported on this machine
-26014 Cannot process this speed
-26015 The SCP loader did not previously load a package

Docker Errors

-28001 Invalid store signature
-28002 Invalid entry
-28003 Aborted
-28004 Invalid query
-28005 Read entry error
-28006 Invalid current soup
-28007 Invalid command length
-28008 Entry not found
-28009 Bad connection
-28010 File not found
-28011 Incompatible protocol
-28012 Protocol error
-28013 Docking canceled
-28014 Store not found
-28015 Soup not found
-28016 Invalid header
-28017 Out of memory
-28018 Newton version too new
-28019 Package cannot load
-28020 Protocol already registered
-28021 Remote import error
-28022 Bad password error
-28023 Password retry
-28024 Idle too long
-28025 Out of power
-28026 Invalid cursor
-28027 Already busy
-28028 Desktop error
-28029 Cannot connect to modem
-28030 Disconnected
-28031 Access denied
-28100 Disconnect during read
-28101 Read failed
-28102 Communications tool not found
-28103 Invalid modem tool version
-28104 Card not installed
-28105 Browser File Not Found
-28106 Browser Volume Not Found
-28107 Browser Path Not Found

Docker Import and Export Errors

-28200 Syntax error
-28201 Invalid version
-28202 Could not open temporary store
-28203 Could not convert
-28204 Invalid criteria
-28205 Error applying script
-28206 Missing meta data
-28207 Unknown error
-28208 Scanner overflow error
-28209 Data Viz translator error
-28210 Invalid type

Docker Disk Errors

-28300 Disk full
-28301 File not found
-28302 File is write protected
-28303 Duplicate file name
-28304 Too many files open

Docker Desktop DIL Errors

-28700 No Error
-28701 Out of memory
-28702 Invalid pipe state
-28703 Exception error
-28704 Queue full
-28705 Pipe not initialized
-28706 Invalid parameter
-28707 Pipe not ready
-28800 No Error
-28801 Out of object heap memory
-28802 Out of temporary memory
-28803 Unknown slot
-28804 Slot size exceeded
-28805 Slot size required

5. System Services Errors

This section lists the different kinds of Newton system services errors.

Sound Errors

-30000 Generic sound error
-30001 Not enough memory available
-30002 Invalid message
-30003 Sound was not played
-30004 No channel decompressor
-30005 Destination buffer too small
-30006 Sound player busy
-30007 Sound recorder busy
-30008 No samples provided
-30009 Unsupported sound configuration
-30010 Sound channel closed
-30011 Sound cancelled
-30012 The sound volume is set to zero

Compression Errors

-32001 Cannot compress in place
-32002 Parsing error
-32003 Invalid type
-32004 Compression not achieved
-32005 Key not found
-32006 Compression index error
-32007 Cannot decompress in place
-32008 Decompression not achieved
-32009 Unexpected end of source
-32100 Buffer overflow
-32101 Buffer underflow

Memory Errors

-34000 Not free, direct or indirect
-34001 Pointer not aligned to 4-byte boundary
-34002 Pointer to outside of heap
-34003 Unknown infrastructure type
-34004 Free block where there shouldn't be one
-34005 Free list pointer points outside of heap
-34006 Free-list pointer doesn't point at a free block
-34007 Invalid block size
-34008 Forbidden bits set in block size
-34009 Less than minimum size for heap block
-34010 Heap block tool large
-34011 Total free space is more than space for entire heap
-34012 Nil pointer where not allowed
-34013 Actual free space does not match tracked free space
-34014 Linked free space does not match tracked free space
-34015 Master pointer doesn't point back to a handle block
-34016 Invalid block size adjustment
-34017 Internal block may be mangled
-34018 The heap is invalid
-34019 Caught an exception while checking the heap
-34020 Invalid heap header

Communications Transport Errors

-36001 Incorrect address format
-36002 Incorrect option format
-36003 Cancel is in progress
-36005 Could not allocated address
-36006 Operation not supported in the current tool state
-36008 System error
-36012 Flow control problem
-36018 Unsupported primitive
-36019 State change is in process
-36030 There's already a synchronous call pending

Sharp IR Errors

-38001 No response - protocol time out
-38002 Cancelled - remote side cancelled operation
-38003 Protocol error
-38004 Data checksum failed
-38005 Remote side receive failed
-38006 Bad connection - allowed number of retries exceeded
-38007 SCC data errors on receive
-38008 Unspecified beaming error

Online Service Errors

-40102 Lost connection to host
-40103 Lost connection to host
-40104 The host is not responding
-40105 There is a problem reading from the host
-40106 Failed to connect to local access number

Printing Errors

-44000 Printer problem
-44001 Newton is unable to print
-44002 No printer is connected
-44003 Printer busy
-44004 Printing stopped
-44005 Lost contact with the printer
-44006 Image too complex for printer
-44100 The next sheet of paper must be inserted
-44101 The phone number must be dialed now
-44102 There is no paper tray
-44103 The wrong paper tray is attached
-44104 The printer has no paper
-44105 The printer has no ink
-44106 The printer is jammed
-44107 The printer door is open
-44108 The printer is off-line

Newton Connection Errors

-46001 Connection initialization failed
-46002 Timer error
-46003 Connection request was denied by the remote
-46004 Unable to connect because there are no endpoints available
-46005 A connect request was received but no service name was given

6. NewtonScript Environment Errors

This section lists the different kinds of NewtonScript error codes.

Store and Soup Errors

-48001 The PCMCIA card is not a data storage card
-48002 Store format is too old to understand
-48003 Store format is too new to understand
-48004 Store is corrupted, can't recover
-48005 Single object is corrupted, can't recover
-48006 Object stream has unknown format version
-48007 Fault block is invalid
-48008 Not a fault block
-48009 Not a soup entry
-48010 Tried to remove a store that was not registered
-48011 Soup index has an unknown type
-48012 Soup index has an unknown key structure
-48013 Soup index does not exist
-48014 A soup with this name already exists
-48015 Tried to CopyEntries to a union soup
-48016 Soup is invalid (probably from a removed store)
-48017 Soup is invalid (probably from a removed store)
-48018 Entry is invalid (probably from a removed store)
-48019 Key does not have the type specified in the index
-48020 Store is in ROM
-48021 Soup already has an index with this path
-48022 Internal error-something unexpected happened
-48023 Tried to call RemoveIndex on the _uniqueID index
-48024 Query type missing or unknown
-48025 Discovered index inconsistency
-48026 Maximum number of soup tags reached
-48027 Soup does not have a tags index
-48028 Invalid tags specification in the query
-48029 Store cannot handle the feature (for example, large objects)
-48030 Unknown sorting table
-48031 Cannot do union soup because of different sorting tables
-48032 Invalid index description
-48033 Cannot use virtual objects for soup entry keys

Object System Errors

-48200 Expected a frame, array, or binary object
-48201 Invalid magic pointer
-48202 Empty path
-48203 Invalid segment in path expression
-48204 Path failed
-48205 Index out of bounds (string or array)
-48206 Source and destination must be different objects
-48207 Long out of range
-48210 Bad arguments
-48211 String too big
-48212 Expected a frame, array, or binary object
-48213 Expected a frame, array, or binary object
-48214 Object is read-only
-48216 Out of heap memory
-48217 Invalid attempted use of magic pointer
-48218 Cannot create or change an object to negative size
-48219 Value out of range
-48220 Could not resize locked object
-48221 Reference to deactivated package
-48222 Exception is not a subexception of |evt.ex|

Bad Type Errors

-48400 Expected a frame
-48401 Expected an array
-48402 Expected a string
-48403 Expected a frame, array, or binary object
-48404 Expected a number
-48405 Expected a real
-48406 Expected an integer
-48407 Expected a character
-48408 Expected a binary object
-48409 Expected a path expression (or a symbol or integer)
-48410 Expected a symbol
-48411 Expected a function
-48412 Expected a frame or an array
-48413 Expected an array or nil
-48414 Expected a string or nil
-48415 Expected a binary object or nil
-48416 Unexpected frame
-48417 Unexpected binary object
-48418 Unexpected immediate
-48419 Expected an array or string
-48420 Expected a virtual binary object
-48421 Expected a package
-48422 Expected nil
-48423 Expected nil or a symbol
-48424 Expected nil or true
-48425 Expected an integer or an array

Compiler Errors

-48600 Could not open a listener window
-48601 Syntax error
-48603 Cannot assign to a constant
-48604 Cannot test for subscript existence; use length
-48605 Global variables not allowed in applications
-48606 Cannot have a global variable and a global constant with the same name
-48607 Cannot redefine a constant
-48608 Cannot have a variable and a constant with the same name in the same scope
-48609 Non-literal expression for constant initializer
-48610 End of input inside a string
-48611 Odd number of digits between \\u's
-48612 No escapes but \\u are allowed after \\u
-48613 Invalid hex character in \\u string
-48617 Two-digit hex number required after $\\escape
-48618 Four-digit hex number required after $\\u
-48619 Illegal character '%c'
-48620 Invalid hexadecimal integer: %s (out of range)
-48621 Invalid real number (out of range)
-48622 Invalid decimal integer: %s (out of range)
-48626 #xxxx not allowed from NTK
-48627 Not a constant
-48628 Decimal digit required after @

Interpreter Errors

-48800 Not in a break loop
-48803 Wrong number of arguments
-48804 FOR loop BY expression has value zero
-48806 No current exception
-48807 Undefined variable
-48808 Undefined global function
-48809 Undefined method
-48810 No _proto for inherited send
-48811 Tried to access slot of nil
-48814 Local variables and FOR/WITH loops not allowed at top level
-48815 The operation would make the rich string invalid

Communications Endpoint Errors

-54000 An active input spec is required
-54001 Error in the form slot of an input spec
-54002 Trying to send zero-length data
-54003 An input spec is required
-54004 The option you tried to set was missing
-54005 Error in the endSequence slot of an input spec
-54006 Used the Partial method with a bad input spec, or unable to do a partial input
-54007 Error in termination slot of input spec
-54008 Error in target slot of input spec
-54009 Error in filter slot of input spec
-54010 Attempted to receive binary data with no target object specified
-54011 Attempted to send or receive template data without a template specified
-54012 Tried to set an input spec when one was already active
-54013 Invalid value in filter.byteProxy.proxy slot of input spec
-54014 Endpoint object is missing
-54015 Method not supported, or called inappropriately
-54016 The character specified in the filter.byteProxy.proxy slot of the input spec is more than a single byte
-54021 Option failed
-54022 Option set, but set value is different from requested value
-54023 Set attempted on read-only option
-54024 Option not supported
-54025 Invalid option opcode
-54026 Option not found
-54027 One or more requested options missing

7. Device Driver Errors

This section lists the device driver error codes.

Tablet Driver Errors

-56001 Attempted to call the tablet driver before it was loaded
-56002 Attempted to create a tablet driver a second time
-56003 Creation of tablet driver failed
-56004 Unable to enter bypass mode
-56005 Not in bypass mode
-56006 Cannot add sample to buffer
-56007 No new data since last polling time
-56008 Unsupported function
-56101 Timeout when calibrating
-56102 Calibration aborted

Battery Driver Errors

-56201 Could not find battery driver
-56202 Battery error
-56203 Invalid battery selector

8. Other Services Errors

This section lists the error codes for other services.

Alien Store Errors

-58001 Oversize page
-58002 No such page
-58003 Cannot repage ID
-58004 No more for that page
-58005 Store is damaged

Terug naar de NGN homepage